PROCUREMENT CHECKLIST

How to Measure Bra Cups for Garment Production

A cup-size label is only a starting reference. A sourcing brief needs numerical measurements, the measurement method and the garment context.

01

Start with the reference model

Keep the original supplier model on every drawing, sample label and enquiry line. If your reference is a physical sample, describe which face is the front and whether the left and right pieces differ.

02

Define how each dimension is measured

Use a consistent unit, preferably millimetres. State whether length and width are measured straight across the cup or along the curved surface; these are different values.

  • Length and width, with marked measurement points.
  • Cup depth and the orientation used to measure it.
  • Thickness at the centre, edge and other relevant positions.
  • Any required tolerance, to be agreed after evaluation.
03

Check the garment, not only the loose cup

A/B/C labels do not establish universal fit. Share the garment pattern or pocket dimensions, the intended attachment method and a sample for comparison where available. Confirm the fit in the garment before approving bulk supply.

04

What to put in the enquiry

Model, measurement table, marked photos or drawing, requested material and colour, quantity and unit, and delivery country. Missing values can be identified for follow-up; do not guess them from photographs.

Build a bra cup sample specification sheet

Shortlist the reference models, compare their source-listed material, shape, thickness, sizes and MOQ, then add the requested quantity and order unit. Download the full CSV sample brief to share with your purchasing and pattern-making team. Record your measured dimensions and tolerances in a marked drawing; the comparison table does not replace a fit test.

Compare models & export a sample brief

Checking dimensions across units

NIST lists 1 inch as 2.54 cm. A 4-inch straight line on a pattern therefore measures 101.6 mm. Mark the two endpoints and specify straight width or curved length on the drawing. The same endpoints can give different readings along a curved cup.

Specifying flexible PU foam

For flexible polyurethane foam, density is mass per volume (kg/m³). The Polyurethane Foam Association describes firmness as the force at 25% indentation, and support factor as force at 65% divided by force at 25%. If PU foam is proposed, ask for the sample thickness, test method and results for that grade before comparing two materials.

Put the checklist to work.

Add your model, quantities, specification and delivery country to one requirement.

Prepare an enquiry

SOURCING NOTES

Can I buy a cup using only an A/B/C size label?

A size label is insufficient. Record width, length, depth and thickness at agreed positions, state straight or curved measurements and check the reference in the garment. Use the same method across the size range; no universal size conversion is assumed.