How to measure bra size: a practical three-step guide

To measure bra size, use a flexible measuring tape and a mirror, or ask someone you trust to check that the tape stays level. Remove padded and push-up bras; measure without a bra if comfortable, or use a thin, unpadded style that does not reshape the bust. Stand upright with shoulders relaxed and breathe out normally. Do not hold your breath or pull the tape into the skin. Record underbust and bust in the same unit, including decimals. Repeat both readings before using a calculator: two measurements provide a starting size to try, while the garment itself determines the final fit.

Measure the underbust

Place the tape directly beneath the breast tissue, level around the ribs and back. Keep it snug enough to stay in place but without making an indentation. Lower your arms, breathe out naturally and read the measurement. In this bra fitting guide, snug does not mean the tightest reading you can force.

Measure the full bust

Move the tape around the fullest part of the bust. Keep it horizontal at the back, with light contact at the front. Avoid flattening tissue and check in the mirror before reading. Record this value in the same unit as your underbust; an inch reading cannot be subtracted from a centimetre reading.

Calculate and interpret the difference

Subtract underbust from bust using the original readings. For example, 90 cm minus 75 cm gives a 15 cm difference. The table below and the bra size calculator use the same rules. A 15 cm difference gives a JP/CN C reference here; the US/UK method uses inches and produces a different starting label.

From body measurements to a garment label

Wacoal Europe gives a real relabelling example for Freya, Elomi and Fantasie. A UK 32F formerly labelled FR 85F is now labelled FR 85G. Record the brand, market and original size label alongside the measurements before choosing a cup mould.

Measurement example · 1 in = 2.54 cm
Measurement examplecmin
Underbust7529.53
Full bust9135.83
Difference166.3
How the estimates are calculated
US / UKinchesEU · cmJP / CN · cm
A / A1A: 12A: 10
B / B2B: 14B: 12.5
C / C3C: 16C: 15
D / D4D: 18D: 17.5
DD/E / DD5E: 20E: 20
DDD/F / E6F: 22F: 22.5
G / F7G: 24G: 25
H / FF8H: 26H: 27.5

Five errors that change your bra size measurement

  1. Pulling the underbust tape too tight

    Reads underbust too small and increases the difference: a smaller band and larger cup estimate may result.

  2. Leaving the bust tape loose

    Reads bust too large, pushing the cup estimate upward. Keep contact without compression.

  3. Measuring over padding

    Includes the padding in the bust measurement and can produce a larger cup estimate.

  4. Compressing the fullest part

    Reads bust too small and reduces the estimated cup. Check that the tape does not flatten tissue.

  5. Holding a deep breath

    Can enlarge the underbust reading and produce a larger band and a smaller cup difference. Remeasure after an ordinary exhale.

Methods and sources

Prepared by CUPNORA, operated by Yiwu Jinhong Garment Accessories Co., Ltd. AI assists organisation and translation. These provisional rules have not been confirmed as the factory’s grading standard.

CUPNORA editorial policy